Check out some similar questions!
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Goodman Furnace
[ 2 Answers ]
Hello, I have a goodman furnace and it is not firing when I turn it on to heat. The gas is on but the unit never comes on once I turn the thermostat to heating and adjust the temp on the thermostat. What do I need to do to fix this?
Goodman Furnace did come on
[ 1 Answers ]
I got a Goodman GMH950904cx furnace. I installed it about a month ago, and it worked fine when I turned it on. Recently, the weather chilled and I tried to turn on the furnace everything worked except there is no gas coming up. The motor runs, and ignitor light up but no GAS. The gas tank is...
Goodman Furnace
[ 3 Answers ]
I have a six year old Goodman Furnace that will not kick on or even begin the start up cycle. Last year I replaced the ignitor and checked it out today and looks fine. Any obvious place I should start to determine the issue? Thanks Jim
Goodman gas furnace
[ 3 Answers ]
I have a goodman gas furnace, gms91155dxa for about a year. Recently I notice the furnace repeats on and off while it didn't reach at set temperature. After the heater is on, it runs some minutes and it shuts off itself. And the draft inducing motor runs, the ignitor is on and gas blows and in... View more questions Search
Add your answer here.
|