Ask Experts Questions for FREE Help !
Ask
    kenjohnson's Avatar
    kenjohnson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 1, 2009, 06:30 AM
    Different ring gear sizes and different starter drive tooth count
    I have a 84 bronco II 2.8 v6 with starter issues. I was told that Ford offered 2 different tooth count flywheels as well as 2 different tooth count starter drives. Can't find out which goes with which. Any answers? Thank you.

Check out some similar questions!

14.5 Brigs and stratton rider mower, ring gear/timing? [ 3 Answers ]

I changed the ring gear on this older riding mower, put back on, only one way, with new key, only one way, and now it will not fire. It did once, started, and was so loud had to shut dowm immeadiatley. What did I do wrong? It s not worth a lot of money and none now, but cannot afford a new one, if...

B&S starter gear, 16hp cast iron single [ 3 Answers ]

Have a 16hp B&S single cyl cast iron motor that continues destroying the starter gear. Motor has aluminum ring gear and plastic/fiber starter gear. After several starts (3 to 10) it destroys the teeth on the starter gear. I'v checked with my dealer and the parts are correct #s. The ring gear was...

Ring gear assembly instructions for 14.5 overhead valves Briggs & Stratton [ 1 Answers ]

Where can I get written instructions for the Briggs & Stratton 14.5 overhead valve ring gear assembly for a rider mower? Thanks for a quick response.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.