 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Outdoor wood furnace- 2 t-stats,one blower
I have been looking through the questions and answers, on this subject, and have not found the complete solution. I have an outdoor wood furnace installed, with the hot water to forced air heat exchanger in place. My original forced air oil burner is still hooked up and works fine. I have a Honeywell TH3110D t-stat and a White-Rodgers 90-113 Fan control. I want to run the fan to circulate the heat, based on the call for heat from the new t-stat.
How far off base am I? I appreciate your advice. Thank you, Kevin |
||||
Check out some similar questions!
I am installing a central boiler outdoor wood furnace. I did not understand their hookup with pex running straight to the water to water exchanger,and then on to the furnace. I wondered what would shut the heat down when the call for heat ended. I started installation this way---------(I have...
I need help. I have a gas Amana furnace that I have hooked to one thermostat (4 wires) and then a second thermostat (2 wires) hooked for only the fan to come on with use of my outdoor wood furnace. When the 2 wire thermostat call for the fan to come on, the outside compressor will come on. It...
I have several questions regarding an outdoor wood furnace. I know there is a "special" paint used on these, that is "normal" to throw off a smell. As well as some "light oils" used in construction. We are having the problem that the house is getting smokey, and that smell is strong. How long...
I just installed an Outdoor Wood Furnace and need help with wiring the thermostat. My indoor furnace is a Trane Gas Furnaceand A/C. I am trying to wire a second thermostat to the blower on the gas furnace so I can just run the blower. The Trane thermostat wires are W,R, Y, and G. I installed a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
