Ask Experts Questions for FREE Help !
Ask
    paulw1969's Avatar
    paulw1969 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 28, 2009, 04:41 PM
    Homart wiring
    I need help in wiring my sears homart furance back together
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 28, 2009, 05:45 PM
    That must be a old one. See if the diagram is on the back side of the blower door. If not you might be toast since they are not readily available it seems.

    One item that you should check before you put any time in the wiring is to check the heat exchanger for cracks or hot spots. The old Homart furnaces were known for these safety problems and if present that furnace could kill you with CO. The Homatrs are at least 40 to 50 years old and way past there life cycle duration. I like old stuff myself since it brings back memories of my younger HVAC service days but they can be dangerous so I am just passing this info along.

    Now if you could find the real model number some tracking could be done. In the mean time try this to see if it is one of the old two cell types.

    KENMORE | Model #867761831 | GAS-FIRED SECTIONAL FURNACES | SearsPartsDirect.com

    BTW for your info almost all Sears furnaces made back then were made by the Dornback furnace company.

    You might get lucky
    Adams manufacturing company now owns the Dornback name and you can contact them at the number below.

    Dornback Furnace Division
    9545 Granger Road.
    Garfield Heights, OH 44125

    Phone: (216) 662-1600
    Fax: (216) 587-6807
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter fan wiring model 26107 light fixture wiring sequence [ 2 Answers ]

There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?

Lighting a homart boiler [ 1 Answers ]

How do I light a homart model 867 boiler furnace and make sure I have water in it

Sears Homart furnace - very old! [ 3 Answers ]

We just bought a house with a Sears Homart Gas fired furnace, model # 867.761831. The instruction manual that I found here does not show the actual model we have. I and my brother in law have tried repeatedly to light the pilot light with no success. It burns on natural gas. We've made sure the...

Where can I buy a Homart Toilet tank [ 2 Answers ]

I didn't realize my toilet was so rare. I am searching for a Homart toilet tank and can not find one. I live in Baltimore City, MD zip 21231. Any suggestions. I have searched for hours on the internet - to no avail

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

View more questions Search