Ask Experts Questions for FREE Help !
Ask
    motherelf's Avatar
    motherelf Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 28, 2009, 02:22 PM
    John deere lL110 lawn tractor year
    Where do I find the serial number in a John Deere L110. How do I tell the year?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 30, 2009, 07:06 AM

    Hi,
    The serial number tag is on the frame above and inside the left rear tire. It will be 13 characters, alphabetic and numeric. You will notice that L110 is in it. The first six are factory and model , the seventh is a separator and the final six are the actual machine number.
    Any good Deere dealer with access to Deere's secured site can do a Serial Number Search that will yield original purchase info, and anything else pertinient including if it has been reported stolen.
    Other than that the Code on the engine will tell the manufacture date of it in the form of ""YYMMDDSS" where the Ys = year, the Ms = month, the Ds = day and the Ss = shift.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John deere 160 lawn tractor [ 2 Answers ]

I have a john deere 160 lawn tractor that won't start. Was running great. Next time zi went to use it, it wouldn't start. Pulled the plug it didn't look bad but I replaced it anyway. Still no start. Checked and no spark. Bought a new coil still nothing. Gap is good on the plug and the coil. Nothing...

John deere lt 190 lawn tractor [ 1 Answers ]

Do you know how to adjust the reverse pedal on a john derre lt 190 lawn tractor? The pedal does not go down far enough and therefore goes very slow in reverse. Thanks

John Deere Lawn Tractor [ 1 Answers ]

Have a model LA110 automatic. Believe the starter solenoid has gone bad. Cannot find parts list anywhere. Need part number for starter solenoid. Also, need instructions on how to "jump" the solenoid with the battery to start mower until I get new part. Thanks in advance for any help you can...

John Deere 160 lawn tractor [ 2 Answers ]

I had to replace the belts in my tractor, and hence had to remove the clutch etc. to do so. Now that I have it back together, the clutch does not disengage the belts and stop the tractor correctly. I assume this is either an adjustment on the clutch, or the belt itself. Can anyone help with this??...

View more questions Search