 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat wiring codes
Have a totaline thermostat wired at terminals (R,G,Y1,W1,C) want to install lux programmable thermostat Terminals are labeled (W,Y,G,B,O,RC,RH,C) terminals RC and RH have a wire that join them. I have a 1 heat, 1 cool 24 vac power. Do I connect the wires in the following sequence R to RH, G to G, y1 to Y, W1 to W, and C to C.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Have a Lennox Thermostat installed now, Wires read (R)=Black, (Y)=Blue, (F)=Green, (M)=red, (Y)=Orange. I want to install a Hunter Auto Saver 550 Model # 44550. The thermostat panel connector are in this order, W,RH,RC,G,Y/Y1,O/B Need to know what color wire need to go on what terminal on the...
WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...
I have a Carrier heat pump, comfort series that was installed five months ago. I want to confirm the settings in the thermostat are correct. The stat is EDGE programmable thermostat I don't want the owner's manual codes, but the one the dealer uses by holding on the fan button and getting...
I am attempting to install a Hunter ceiling fan and light. The color of the wire in the fan are black, black-and-white, green, and white. For a single switch operation the instructions are to connect the black and black-and-white wires from the fan with the black wire from the ceiling; then the...
In an attempt to install a new thermostat for our heat pump, we failed to label the wires before removing old thermostat. How can we find out how to properly connect wires to the new thermostat. We have Concord outdoor unit (44407H097), Armstrong indoor unit (BCZ36A12A-1B). Our old thermostat is...
View more questions Search
|
