Ask Experts Questions for FREE Help !
Ask
    sullipop2's Avatar
    sullipop2 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 23, 2009, 09:25 AM
    Low pressure shower
    I have a heavy duty shower pump in the loft which supplies a ground floor shower very satisfactory but will only supply the upstairs shower if I first turn on the ground floor one. Immediately that one starts the upstairs one will also start and keep going even if I then turn off the G/F one. For a little while I can turn the upstairs one on independent of the G/F one as long as I lower the hand held flexable pipe to below my knee, but after a day or so it will not turn on at all.

    Thanks in anticipation

    Tom Sullivan

Check out some similar questions!

Low cold water pressure throughout the house [ 3 Answers ]

What would cause me to have low cold water pressure throughout the entire house but the hot is fine? And how can I fix it?

Low hot water pressure shower head and tub faucet [ 7 Answers ]

Hi - We have low hot water pressure from both our shower head and tub faucet It's a Delta single arm ball handle if that helps. Any suggestions would be appreciated.

Low water pressure [ 2 Answers ]

I have a well that supplies are water we put a filter on the line that comes into the house and hot water heater the pressure is very low you cannot run a washing machine or flush the toilet while showering or using another faucette in the house the water then drips out is the filter causing this?...

Low hot/cold water pressure with well? [ 0 Answers ]

Hi, I have a small house with a well. In recent weeks the water pressure to the house has dropped substantially. This is true for both the hot and cold water, and occurs at all taps faucets etc. At this point if you turn on a fuacet in one part of the house water flow to other facilities, shower,...

Well pump ,low pressure [ 2 Answers ]

Well with submersible pump has low pressure. After changing gauge and pressure switch,no change. Pressure gauge consistently reads 10 PSI. Pressure at tank schraeder valve read 18 PSI so I pumped tank up to 38 PSI. Still no change in pressure or pressure gauge reading of 10 PSI. Pressure is...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.