Ask Experts Questions for FREE Help !
Ask
    zakkyBs's Avatar
    zakkyBs Posts: 6, Reputation: 1
    New Member
     
    #1

    Nov 21, 2009, 12:32 AM
    How to make a mold of frnt bumper +Fender a mass produce>bumper plastic rest fibergls
    I want to know how to make a mold of a front bumper a fender and a hood and it has to be obviously different from factory or anyone else so I can pattent it which I will do myself but I need to know how to make a few molds and how to mass produce using fiberglass for the fender and hood and using plastic for the front bumper for a good price... it's a pretty tough question some people claim they can do it but its very time consuming and expensive or really cheap sounding like making a mold of a front bumper by fiber glassing both inside and out of bumper and somehow getting the bumper out or just taking the fiberglass mold and add a layer so adding another fiberglass mold with somew thing to prevent it from sticking but I would prefer a full even mold that I could open and close and pour fiberglass in or some kind of plastic
    zakkyBs's Avatar
    zakkyBs Posts: 6, Reputation: 1
    New Member
     
    #2

    Nov 21, 2009, 12:38 AM
    How to make carbon fiber pieces fpr car body parts or anything but specially hoods
    I am opening a business and I want to figure out how to fiber glass vehicle parts to add to the list of custom things I can do for my customers,, I mean do you get a mold and pour fiberglass in>>>>>>>>>> or do you lay it on some how whitch I don't think will work but might be easy ><>> I've looked maybe I'm just searching the wrong thing

    Thanks for your input
    shazamataz's Avatar
    shazamataz Posts: 6,642, Reputation: 1244
    Uber Member
     
    #3

    Nov 21, 2009, 01:12 AM

    You need a mould and then you lay down the fibreglass and resin, alternating between the 2 until you reach the desired thickness.
    You then remove the piece and sand and prime it.

    Fibreglass comes in rolls of varying lengths, and resin is usually bought in 20 litre drums.

    Fibreglassing is a little more complex than just pouring something into a mould so it would be best if you could talk to someone about the process before attempting it yourself.

    Boating shops are usually pretty good places to start.
    zakkyBs's Avatar
    zakkyBs Posts: 6, Reputation: 1
    New Member
     
    #4

    Nov 21, 2009, 01:21 AM
    Quote Originally Posted by shazamataz View Post
    You need a mould and then you lay down the fibreglass and resin, alternating between the 2 until you reach the desired thickness.
    You then remove the piece and sand and prime it.

    Fibreglass comes in rolls of varying lengths, and resin is usually bought in 20 litre drums.

    Fibreglassing is a little more complex than just pouring something into a mould so it would be best if you could talk to someone about the process before attempting it yourself.

    Boating shops are usually pretty good places to start.
    Thanks for the good advice do you know how to make a mold or how to carbon fiber parts
    shazamataz's Avatar
    shazamataz Posts: 6,642, Reputation: 1244
    Uber Member
     
    #5

    Nov 21, 2009, 03:43 AM

    I honestly don't know how to make an actual mould, people I know who have fibreglass moulds have purchased them.
    The actual task of fibreglassing is not too difficult, it just takes a lot of practice.

    Carbon fibre is basically a weave of metal, there are quite a few types of carbon fibre (dry carbon, kevlar etc) not easy to work with and very expensive. I have a few carbon fibre parts here but honestly have no idea how to shape them.
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
     
    #6

    Nov 21, 2009, 06:23 AM

    If we told you how to do this, then you would have to include any one of us in your profits. On the other hand, it would not be your design or patent if you can ask others to help you with it. You idea is almost impossible to accomplish anyway.

    Tick
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #7

    Nov 22, 2009, 06:24 AM

    I would look through these, Very helpfull:
    Fiberglass Mold Videos - Metacafe
    zakkyBs's Avatar
    zakkyBs Posts: 6, Reputation: 1
    New Member
     
    #8

    Nov 25, 2009, 12:03 PM
    Quote Originally Posted by tickle View Post
    If we told you how to do this, then you would have to include any one of us in your profits. On the other hand, it would not be your design or patent if you can ask others to help you with it. You idea is almost impossible to accomplish anyway.

    tick
    Just looking for advise from smart people and people of professions that might have come across this.. not looking for negative people that try to bring people down and I'm sure if people wanted to take profits from me if they make me a lot of money that works for me.. btw time is money tick and you wasted about 5 minutes of it so you owe me some money yourself... if you got anthing good to add maybe well call it even... its not impossible aftermarket body parts are made these ways by mny shops

    Thanks for trying to come up with an answer though good try(pat on back) everyone else thank you ill keep people posted on how it works


    Thank you
    zakkyBs's Avatar
    zakkyBs Posts: 6, Reputation: 1
    New Member
     
    #9

    Nov 25, 2009, 12:04 PM
    Quote Originally Posted by tickle View Post
    If we told you how to do this, then you would have to include any one of us in your profits. On the other hand, it would not be your design or patent if you can ask others to help you with it. You idea is almost impossible to accomplish anyway.

    tick
    \\


    Oo your from canada

    Explains everything
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #10

    Nov 25, 2009, 02:02 PM

    Did you at least look at the link I provided?
    zakkyBs's Avatar
    zakkyBs Posts: 6, Reputation: 1
    New Member
     
    #11

    Nov 25, 2009, 09:17 PM
    Quote Originally Posted by Stratmando View Post
    Did you at least look at the link I provided?
    Yess I did I forgot to thank you >>> thank you.. my speakers don't work so I'm going to have to check it out on another ncomputer but looks good
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #12

    Nov 26, 2009, 07:54 AM

    Headphones may work.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bumper cars [ 4 Answers ]

Hey! Does anyone know where to get a used or discarded bumper car? Im just interested in the shell. I don't want all the other stuff, like the motor, etc. I would appreciate any help on this. Thanks :)

Is it good to put plastic behind shower wall or will it make back mold [ 1 Answers ]

I put plastic behind a shower wall will it trap water and make black mold

Dents in my bumper [ 1 Answers ]

I have a dent in my plastic bumper and it can't pop out and I don't want to use bondo or any thing. How do I get rid of it?

2003 toyota echo plastic bumper [ 1 Answers ]

On the passenger side the molded bumper unsnapped from a plastic railing. It has no damaged. It just un -poped. I wonder how to connect the bumper back On the plastic bracket? Its about a 1" away from the bracket. But I don't see how It connects??


View more questions Search