Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
20amp outlet
[ 1 Answers ]
I am replacing all of the wiring in my old home. I am using a 20a breaker with 12-2 wiring. I'm pretty sure that I have to use 20a outlets and switches as well right? I ask because the 15a outlets and switches are less expensive. I am also confused because the 20a and 15a parts both opperate at the...
Conductor size for 30AMP wall mount a/c outlet
[ 3 Answers ]
I am going to install a dedicated circuit to wall mount a/c, with the following details; single receptacle, 40' run, from distribution panel direct to outlet box, Have not acquired a/c unit, when I do, I will install adequate amperage breaker according to manufacturer's cut sheet. In the meantime...
Generator inlet plug - 50amp versus 30amp
[ 2 Answers ]
I have a generator with a continuous run of 7000 watts and a surge of 8750 watts. I bought a manual transfer switch to install in the house. It has a peak of 12,500 watts. The inlet plug is an Nema L14-50 and is incompatible with my generator as it has a Nema L14-30 plug. My question is, can I...
12-3 wiring from gfi plug to outlet to plug in a 110v pool pump
[ 5 Answers ]
Need to verify proper wiring for above 110v pool pump.
20amp plug with 30 amp outlet
[ 4 Answers ]
I purchased a used tanning bed with a 220 plug and 20 amps.the outlet I am going to use is 220 volts and 30 amps.will this work , or will it damage something? View more questions Search
|