Ask Experts Questions for FREE Help !
Ask
    bossmandude's Avatar
    bossmandude Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2009, 01:31 PM
    Using a ElationDMX operator pro controller and par cans
    I can't seem to get the Operator Pro to run the par 64's that are hooked to my dimmer paks for the pars. The paks light up appropriately but the lights do not respond on or off to the controller.
    I'm connected to a dmx light fixture first and then to the paks. The controller is supposed to be able to handle both intelligent lighting and cans.
    Help. Using xlr mic cable (short run) for now but understand I should use twisted pair wiring. Really much difference?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Nov 19, 2009, 02:55 PM
    Yes the types of cables do make a difference.

    You may be best served buy contacting Elation's tech support:

    Elation Professional - Professional Lighting Products
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Any facts about recycle pop cans? [ 2 Answers ]

1:what would happen if you didn't recycle your pop cans 2:what can pop cans make 3:How many pop cans did people throw away in one year* in canada*

Insinkerator pro-17 [ 1 Answers ]

My insinkerator pro-17 problem started with not shutting off when we turned the plug counter clock wise. Then it would shut off, but now it won't start. We noticed the contact switch that use to be inside the unit, is loose out side of the unit. If we push this switch, the unit works but not...

Spacing for 3'' cans in basement [ 2 Answers ]

I have a customer who wants to use 3'' cans in a basement finish. I could not change his mind to 6''. The size is 42' long and 12' wide. I fiured on having 3 lights centered in width And 8 going the long way spaced at 5' apart Totaling 24 lights total. Does this spacing sound right? ...

Recessed cans and I/C rating, what does it really mean? [ 7 Answers ]

Hello again all, and thanks in advance for any advice you can offer. I installed 8 recessed (6") cans in my attic ceiling. they are rated for insulation contact (I/C) . they are installed in a 2x4 ceiling. i plan to lay insulation perpindicular/over the top of the 2x4's. and then also insulate...

View more questions Search