Ask Experts Questions for FREE Help !
Ask
    solbro's Avatar
    solbro Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 16, 2009, 10:47 PM
    Forced air heater won't light- but it clicks
    When I turn on the thermostat the forced gas air heater makes a clicking sound but will not ignite. The sound comes from the heater. IS there a handyman fix that's doable?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Nov 17, 2009, 04:13 AM
    Brand & model # required for further assistance.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heater blowing cold air - turn up water heater? [ 6 Answers ]

Hello - my apartment heater is blowing cold air. I was told by maintenance folks to turn up my water heater (Rheem Model #42V50-65F Gas). It's already turned up almost to max, and I didn't have this problem over the last two winters. My water heater was recently replaced - could this be part of...

Carrier Air Conditioner & Heater from 1980s [ 0 Answers ]

I am trying to install an 1980s model (52BGA312301AA) in my garage. The person who gave it to me says it works, but I know little about these. Anyone have experience with installing these or know where I can find information. It it a air con/heater unit like one finds in many motels across the...

Forced Air Fan Heater [ 1 Answers ]

I have just bought a Dimplex Forced Air Fan heater and want to connect it to the wall where an baseboard heater was. The Forced Air Fan heater has three wires... Red, Black, and then a Blue wire. The wires from the wall are Red, Black and then what appears to be a ground wire. I also have a...

Forced Hot Air Heater [ 1 Answers ]

I've noticed lately that my forced hot hair heating system is louder than it used to be. I have to turn up the TV when it goes on. I don't recall it ever being that noticeable or loud. Any suggestions on what it could be?

Forced air heater [ 1 Answers ]

Blows 3 amp fuse. After fuse blows fan comes on. Ignitor works prior to fuse blowing but no gas. One resistor on board appears to have black mark.

View more questions Search