 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman aepf air handler
I am currently having a problem with a goodman 16 seer air handler after the system meets temperature the blower motor keeps running. I have done several things and even called goodman tech support and got no help. I want to know if it has something to do with the purple wire that comes off the board or if anyone has seen this before?
|
||||
Check out some similar questions!
I have a Carrier - Bryant Heat Pump Heating/Cooling System. A week back, the 5A fuse popped. I replaced it and noticed it pops when there is a need for AUX to come ON. So when the thermostat stat is set to 70 and the room temp is 65 the fuse pops (Typically during cold mornings). When the room...
I have a TRANE model TWE040E130A1. The air handler motor will not run. It tries to start but sits there and rotates back and forth a couple of times and stops. It will repeat this cycle several times and then just stop. I have tried to assist the fan by spinning it in the direction of rotation with...
I have a Goodman Air Handler AH2429 and the heating furnace won't shut-off. When I disconnect the red wire from the furnace leading to the thermostat the furnace shuts-off and when I reconnected the wire, the furnace heat turns on (runs). I also checked the thermostat wiring - red to Rh,...
Trying to take goodman air handler A-30 from straight ac and convert to heat pump fan coil only has three low voltage wires how do I go about wiring?
Does anyone know where I can obtain a wiring diagram/schematic for a Goodman Air Handler? The Model# is AEPT 030-00C-1A; Serial #0508047623; 208/240v - single phase; 2 amp 1/2 HP motor. Thanks. Eugeno
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
