Ask Experts Questions for FREE Help !
Ask
    maximus44's Avatar
    maximus44 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 15, 2009, 02:23 PM
    My pilot is fine but no flame off the burners
    Hello, I have an older model furnace model Armstrong gas EG6G125DC20-2 forced air furnace. I notice the blower will run when the thermostat is turned to the desired heat, there is clicking on the unit as if the gas valve wants to open or it is calling for heat, but after a few try's the burners never lights. There is a pilot light off the thermocouple, but not a flame. Can anyone help me on this one. And the furnace continues through the cycle and the inducer fan blower continues to run and it will eventually shut off. Is this the gas valve? HELP!!

Check out some similar questions!

Pilot is lit but burners will not light [ 7 Answers ]

I have a Fraser-Johnston closet mounted Natural gas using Central heating unit. The unit has been off all summer and I just changed the filters and relit pilot. When I set the thermostat I hear it click at the right temputure for it to turnon but the burners don't even try to light.. Could it be...

Pilot on furnace on but burners won't come on [ 2 Answers ]

My furnace is having some trouble. The pilot is on but the burners won't light. I was wondering if there is a simple solution to this problem. I'm trying to avoid expensive fixes if at all possible. Any help is greatly appreciated. Thanks.

Furnace pilot is on, but burners do not ignite [ 1 Answers ]

I have a Carrier furnace 201BB and the pilot comes on but theburners do not ignite all the time. What can I do. Is there a part that needs changed. HELP

Furnace problems - no flame but all else seems fine [ 3 Answers ]

My upstairs furnace (located in the attic) has no flame. It buzzes when the thermostat demands heat then about 30 seconds later the fan comes on, but no flame. I managed to light the pilot light manually but it did not change the behavior in the slightest. I suspect the gas valve is bad since...

Blower turns on and off / flame works fine [ 1 Answers ]

I have a Luxaire Delux High Efficiency Furnace (PBNU-LD12N1000)that probably isn't to efficient since it's about 15 years old. I recently bought a new home and have had trouble with the blower in the furnace turning off before the house is heated to the correct temp. It will then turn itself back...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.