Ask Experts Questions for FREE Help !
Ask
    Plumberpatty's Avatar
    Plumberpatty Posts: 10, Reputation: 1
    New Member
     
    #1

    Nov 11, 2009, 09:55 AM
    Glass tile in the kitchen
    Is it OK to install glass tile (mosaic and larger untis) on a kitchen backsplash above the range? I had never considered this to be a problem, but there appears to be conflicting information on the internet and a client is convinced that it is not a suitable product for this type of application. Many thanks for any advice!
    Bljack's Avatar
    Bljack Posts: 245, Reputation: 28
    Full Member
     
    #2

    Nov 11, 2009, 11:04 AM
    Yes, Patty, you can install glass tile behind the stove top. Glass can have it's challenges because it's impervious and has a significantly different rate of expansion and contraction to heat/cool down cycles. Thinset selection is extremely important and many glass tile companies will specify which setting products to use.

    It's no doubt that there would be tons of info out there saying how problematic glass tile is. What do they say, a satisfied customer tells 1 person and a dissatisfied customer tells 10? A hack installer can make a legitimate sounding argument about the product when they had no idea how to install it rather than to admit their fault.

    A homeowner given the wrong info from a TV program or big box store will blame the product after following all the steps they were given and the product failed.

    How many inspections have I done where an installer blamed "the house settled" on failing tile grout?

    Glass doesn't leave room for error, but thousands of square feet are successfully installed every day by knowledgeable mechanics.
    Plumberpatty's Avatar
    Plumberpatty Posts: 10, Reputation: 1
    New Member
     
    #3

    Nov 11, 2009, 11:54 AM
    Many thanks, Bljack! Very informative! I'll pass on the good news!

    Quote Originally Posted by Bljack View Post
    Yes, Patty, you can install glass tile behind the stove top. Glass can have it's challenges because it's impervious and has a significantly different rate of expansion and contraction to heat/cool down cycles. Thinset selection is extremely important and many glass tile companies will specify which setting products to use.

    It's no doubt that there would be tons of info out there saying how problematic glass tile is. What do they say, a satisfied customer tells 1 person and a dissatisfied customer tells 10? A hack installer can make a legitimate sounding argument about the product when they had no idea how to install it rather than to admit their fault.

    A homeowner given the wrong info from a tv program or big box store will blame the product after following all the steps they were given and the product failed.

    How many inspections have I done where an installer blamed "the house settled" on failing tile grout?

    Glass doesn't leave room for error, but thousands of square feet are successfully installed every day by knowledgeable mechanics.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to lower a flange too high on glass tile floor, unable to push it down [ 3 Answers ]

Hi, I removed the toilet and floor of one of my 1952 house's bathroom. I retiled it but now the flange is 1/4' too high. The tube is metal concrete slab poured over it. It was higher before I put a wood panel over the flange and hammered it down. I thought it would slide inside the metal tube but...

Tile over vinyl kitchen counter? [ 2 Answers ]

I have a kitchen counter that has a top surface of a porous vinyl. Can I place ceramic tiles OVER that vinyl or do I need to somehow take the vinyl off? Thank you!

Marble and glass tile backers [ 3 Answers ]

I am installing natural marble 12x12 tiles on the floor. Do I have to use grout? I am using ¼ “ cement board for the sub floor. I think there is only one layer of ¾” plywood. Second. I want to install glass mosaic I am coloring and myself. I was told I have to use a minimum ½” cement...


View more questions Search