 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Dryer (electric) won't heat up already cleaned
Hello there, hoping you can help me. I have an Electronic Fabricmaster, Kenmore -Heavy Duty - Extra Capacity - Ultra Care Dryer. Model #110-8788290 It's about 13 years old now. I have already cleaned out all the lint from every orphus on it. It simply won't get hot. Everything else seems to work excellent, so we are thinking it may be the thermastat but don't have a clue where it is. Could you please help me? Thanks in advance
Lainie:confused: |
||||
Check out some similar questions!
I replaced the heating element and thermostat and dyer will still not heat up
I have a Kenmore 90 series electric dryer and have been having problems. About 2 weeks ago it stopped drying. I check the things I'm supposed to, house fuses, coil, thermal fuses, etc. It turned out to be the thermal cut-off, so I replaced it. The dryer worked fine for about 5 loads then stopped...
I have a Kenmore Elite Electric dryer (model# 110.63952102). The dryer runs without heat. The relay seems fine. I would like to check the heat element and I saw it located on the right side from the front panel. How can I take it out and how do check it? Thanks
All I did today was tilt the dryer forward while I disconnected the vent lines and cleaned all of them from the back of the dryer all the way to the outside of the house. Could I have screwed up the Pilot by tilting it and keeping it tilted for such a long time? I thought I would have made the wife...
This is my first dryer and soon as 3 year warranty goes out it start to act up. I did cut off/on both the breakers to see if it help, but apparently not other than that everything works. I never look inside the dryer before so I have no idea what the thermostat nor a fuse look like and where...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
