Ask Experts Questions for FREE Help !
Ask
    CateKateCat's Avatar
    CateKateCat Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 7, 2009, 10:28 AM
    Old house with too many outlets on one breaker?
    I am currently renting the second floor of a house in RI. This how was built 100+ years ago. Today I had a breaker trip in my L/R. I went to turn my sons light on for him in his room, no go. Then walked into my computer/bedroom, where there are 2 computers and they were off as well. My first question is, I found today that there are 12 oulets, plus 2 over head lights all on the same circuit. Is this allowed?

    Question number 2: There are also outlets in my apartment that have 3 prongs with nothing attached to the ground. I was looking at 2 outlets on the same string of wiring on the wall and noticed one had a 2 prong outlet and one had a 3, so my curiosity got the best of me and I popped the cover off. (I am an electrician in the military) I don't deal with household electrical, learned some basic NEC is school, but this also just doesn't seem right. Is it right or wrong?

    Thanks,
    Concerned mom
    Tev's Avatar
    Tev Posts: 232, Reputation: 20
    Full Member
     
    #2

    Nov 7, 2009, 08:24 PM

    The answer to your first question is yes, it is allowed. It is good that your sparky sense was tingling and telling you it's not the best idea.

    To answer your second question, unless the 3 prong receptacles are GFCI protected and labeled "no equipment ground" it is not allowed. I may be mistaken, but I think even that may no longer be allowed in the 2008 NEC. I wouldn't do it that way regardless so I'm not positive.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Nov 8, 2009, 04:53 AM
    This practice:

    Quote Originally Posted by Tev View Post
    unless the 3 prong receptacles are GFCI protected and labeled "no equipment ground" it is not allowed. I may be mistaken, but I think even that may no longer be allowed in the 2008 NEC. I wouldn't do it that way regardless so I'm not positive.
    Is still allowed.

    Using a GFI device to protect ungrounded 3 wire receptacles help protect anyone using that receptacle from ground faults, however does not create a ground, that would be required for certain devices, such as surge protectors, to operate properly.


    A circuit with a dozen outlets and a couple of lights is allowed, would be considered as a General Purpose Lighting Circuit. Any equipment, such as air conditioners, computers, exercise equipment, may work OK, if not much else is running at the same time, but would work much better if on their own circuit.
    CateKateCat's Avatar
    CateKateCat Posts: 2, Reputation: 1
    New Member
     
    #4

    Nov 8, 2009, 07:05 AM
    So these outlets I have (that are not GFCI's) that are the 3 prong version are allowed? Even if they aren't grounded to anything. Where is the ground going to go if something happens? Isn't that going to cause my electronics to eat themselves or worse Isn't that kind of a fire waiting to happen?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #5

    Nov 8, 2009, 07:29 AM
    I suggest bringing these issues up with your landlord. You should not be messing with this stuff in a place that you rent.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Too many outlets on one breaker [ 6 Answers ]

Basically I have a hobby room with 5 outlets in it and I just found out that they are all wired to one 20 amp breaker. My question is... Can't I just take the cover off the breaker box and put two more breakers in two of the empty spaces and pull the wires off the existing breaker with 5 on it? In...

240V Breaker to 120V outlets? [ 1 Answers ]

Hello there, I have an old house with an unused 240V 40amp breaker. I want to run wire from the panel to some shop equipment that only needs 120V. The breakers are pretty old so replacement of one isn't going to happen. Is there a way to only use 120 of the 240? Your help will be appreciated.

Amount of outlets per breaker [ 10 Answers ]

Just trying to find the standard codes for the # of outlets for each breaker for the typical amperage... 15 amp 110 volt 20 amp 110 volt 30 amp 110 volt

Outlets on circuit breaker [ 2 Answers ]

How many outlets can be on one circuit breaker


View more questions Search