 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replacing 3 wire thermostats for electric baseboard
We have not been able to replace thermostats with 3 wire type. Lowe's employee told us to buy 4 wire and cut off 1 and install. This is the second time we replaced thermostats in one year. The heat just keeps running. Is it possible we need to replace baseboards or it sounds like we have the wrong thermostats. Cannot locate 3 wire type.
|
||||
Check out some similar questions!
I have ran a 12/2 up to a point where I want to power two 1500 (240v) watt baseboard heaters each running off a separate thermostat. Each heater will heat a separate room. I have double-pole wall-mount thermostats. Do I split my 12/2 and go to the thermostats or is there another way this should...
How to replace my Jantrol thermostat with a Hunter one
Hey, I'm replacing some thermostats (double pole,20A circuit) the ones connected now are mechanical ones (aka no batteries) but are getting old and not working so well. I tried connecting a ritetemp one that required two AA batteries, I hooked up everything just as the other one was hooked up:...
I have two sets of cables in the wall box. They each have one white wire and one black wire. They are not marked. Only one of the black/white wires that come from one of the cables has power (120volts) the black and white wires from the other cable don't measure any voltage. The thermostat I...
We built our house 30 years ago using electric baseboard heat. This is 240 volt electric heat. We would like to change the original thermostats (Mears M7) to progammable digital themostats. Those that we have looked at indicate two models; single pole and double pole. How would I determine which...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
