Ask Experts Questions for FREE Help !
Ask
    kramer850's Avatar
    kramer850 Posts: 3, Reputation: 1
    New Member
     
    #1

    Nov 4, 2009, 11:09 AM
    Furnace does not stop running
    Hello, I am having problems with my furnace. It just stays on. The t-stat seems to have no control on the furnace. I actually disconnected it and the furnace still just keeps running. It's a slant fin furnace with a beckett oil burner model AFG. If that helps at all. The only way to control it is to turn off the master switch. I usually turn it on for an hour or two then off till needed again. Thank you for any info.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Nov 4, 2009, 11:14 AM
    Disconnect one of the thermostat wires from the burner control. Usually a R red or W white wire will do. If the unit stops running you have a thermostat wire or thermostat problem. If the unit keeps running after disconnecting one of the thermostat wires then you have a burner safety control problem.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace blower motor start and keeps running won't stop [ 12 Answers ]

I have a Carrier central furnace (furnace model 58GP050-BA). Now with the thermostat off the fan set to auto and the Gas pilot is on. When turn on the power switch to the furnace, the blower motor start and keeps running and won't stop. I have to turn off the power switch to the furnace to turn the...

Day and Night Furnace Blower Won't Stop Running [ 8 Answers ]

I have a Day and Night Furnace that is about 15 years old. It works fine and is producing heat but the BLOWER seems to be stuck and runs constantly. Friends tell me that it could be the Blower Relay or a bad thermostat. Is the blower relay something I can change myself? There is a schematic on...

Oil furnace doesn't stop running [ 1 Answers ]

Today our Lennox OF7-140M oil furnace continued to run long after the temperature was well above thermostat setting. I toyed with the dial thermostat to be sure it was behaving normal. I eventually turned off the furnace with the breaker. After the furnace had set off for several hours I...

Furnace blower motor will not stop running [ 3 Answers ]

Furnace blower motor will not stop running


View more questions Search