Ask Experts Questions for FREE Help !
Ask
    paulet123's Avatar
    paulet123 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 2, 2009, 08:10 AM
    Installing a Aprilaire humidifier ona comfort maker furnace
    What parts do I need to install a Aprilaire humidifier on a Comfort Maker furnace. I been told I need a transformer, how do I wire It? Are there any diagrams available?
    Any help would be appriciated.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Nov 2, 2009, 10:47 AM
    Aprilaire Humidistat Wiring Diagrams

    The above will work for you. Just pick your setup.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Aprilaire humidifier control not working [ 8 Answers ]

I have an Aprilaire 700 humidifier installed on my furnace. I used it for two seasons without issue, but when I turned it on this season it wouldn't run. I can't get water to flow in at the highest setting, and it won't run in test mode either. The green light blinks, but nothing happens. ...

Wiring Aprilaire 700 Humidifier [ 6 Answers ]

I am installing a Aprilaire 700 Humidifier on a Goodman GMNT gas furnace the Furnace control board is a white rogers 50T 35-730 it has separate hum 24v Terminal and hum 120v terminal the Aprilaire 700 Humidifier includes a built in 110v to 24v transformer which one should I connect it to and also...

Aprilaire humidifier-trane xe 90 [ 1 Answers ]

Can anyone tell me how to wire an aprilaire model 700 whole house humidifier to a Trane xe 90 (model:tux060c936c2) furnace. There are no acc terminals on the circuit board.there are two terminals marked hum. Do I need to add a 24vac transformer?the manuals for the furnace and the humidifier are...

How to connect Aprilaire 700 humidifier to gas furnace [ 2 Answers ]

I installed Aprilaire 700 humidifier on my furnace - American Standard Freedom 90 Single Stage but I don't know where I can connect 24V from humidifier control panel in furnace. I'll appreciate your help. YP

Aprilaire Humidifier [ 1 Answers ]

I just installed an Aprilaire 550 humidifier on my Goodman furnace but can't figure out how to wire it. The furnace has a control board which has a 24 volt HUM terminal. My humistat has two terminals. I am looking for a very simple explanation on how to wire this thing up.


View more questions Search