Ask Experts Questions for FREE Help !
Ask
    beasley2000's Avatar
    beasley2000 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2009, 11:10 AM
    Rapair the coaxile plug on a 32" Sanyo TV
    The coaxile plug on the back of my 5 year old TV has come completely off. The female receptor where you connect the digital cable to has come off. Does anyone have any idea if this is a part that can be replaced?:confused:
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Nov 1, 2009, 12:15 PM

    Worse case, you may have to solder on a Coax Pigtail.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

42" sanyo lcd [ 1 Answers ]

I just bought a 42" sanyo lcd and hooked up to hd. All my reds are too red or fuscia and purples are deep. Can't seem to adjust. Could I have something wrong with TV?

Cast Iron: plug stuck in 3" x 1.5" Tee [ 5 Answers ]

Hey there! I've got a 3" cast iron soil stack, with a 1 1/2" Tee fitting which has a plug in it. There's some goop at the joint, it's pretty hard. Not quite JB-weld hard, but hard. It's beige colored. There's not a lot of room in the space, but I've gotten an 18" pipe wrench on it and i...

Murray 12 hp 30in mower "No Fire to Plug" [ 1 Answers ]

Hello , I have a murray 12 hp 30 riding mower . The first problem was it would start (turn over) . I brought an ignition switch and installed. The engine now turns over but not getting any spark (fire ) to the spark plug. I then jumped out the safety switches at each switch and changed out the...

I've got 2 cd drives and only 1 "CD-IN" plug on MB? [ 2 Answers ]

I've got 2 cd drives and only 1 "CD-IN" plug on MB Do I need to connect the audio both plugs from CD Drives to the board? If yes then is there a place to get a adopter or do I need to sodder it. Also would two into one be safe.

View more questions Search