Ask Experts Questions for FREE Help !
Ask
    marcusd55's Avatar
    marcusd55 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 31, 2009, 11:11 PM
    Sodered copper shut off valve leaking
    I have a kitchen sink with a soldered cold water line attached to shut off valve. I have taken off the handle the screw and the retaining nut taken off. My question is? The stem inside the line how do you remove so I can put new washer on. Help I don't want to call a plumber?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Nov 1, 2009, 03:56 AM
    My question is? The stem inside the line how do you remove so I can put new washer on.
    Are you asking how to replace a washer in a angle stop? (see image)
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Nov 1, 2009, 06:58 AM

    You put the handle back on (no threads engaged in packing nut) and turn counter-clockwise.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leaking Water Shut Off Valve [ 4 Answers ]

The main water shut off valve inside the house is leaking. How do I shut off the valve "outside" the house so we can work on fixing this? The house is 16 yrs old. This is the original valve. Would you estimate that this is a simple washer problem? Or is this best left to a professional...

Shut off valve leaking [ 6 Answers ]

I have water dripping under my kitchen sink. It seems the water is coming from right behind the shut off valve bolt. Can and how do I fix it ?

Install a copper shut off valve [ 4 Answers ]

Is it necessary to take apart the 3/4 inch copper shut off valve prior to soldering it in place in order to avoid melting the ball seals?

Toilet Shut Off Valve leaking [ 3 Answers ]

I am new on this board so I'll try to make this simple. Just replaced a toilet and now, of course, the shutoff valve leaks. :eek: I decided to replace the valve with a new one since the old valve has been on for quite a few years. The water supply line from the wall is galvanized threaded...

Leaking shut-off valve [ 2 Answers ]

Hi! One of our cold water shutoff valves started to leak for no reason. The leak is not at the glued joints, but under/around the turn handle. When I turned the handle, the valve seemed like it was not open all the way, and when it fully opened, the leak stopped. This valve has not been...

View more questions Search