Ask Experts Questions for FREE Help !
Ask
    MrRentas2's Avatar
    MrRentas2 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 31, 2009, 03:30 PM
    Replacing a seat in distributor valve
    My name is Jose. My problem is with my distributor valve in my shower. I removed the hot water valve and the seat in the end was broken. It came off with another ring, I don't know what this other ring and neither does the hardware store. The new seat is the same size as the old one but the thread has nothing to catch onto. Can some one please help me figure this out. Thank you.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Oct 31, 2009, 04:22 PM

    Can you tell us the brand of mixing valve you have or post a picture?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #3

    Oct 31, 2009, 07:01 PM

    In order to help you we need to know brand and type. Like Ballangerb1 said, please, post photo. Thanks. Milo

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower Valve Stem Seat [ 10 Answers ]

Thanks for all the help. I did look into the pipe and there does appear to be a seat, but it is in poor condition. My seat wrench doesn't seem to work. Would W-D 40 help? :confused:

Replacing needle and seat in yamaha yz80 [ 2 Answers ]

Hey guys, I had fuel leaking out of one of the outlet pipes on the carbi on my 1998 yamaha yz80, I was told by the guys at the store that I needed to replace the needle and seat to fix the problem, I have ordered in the replacement part from yamaha and am waiting for it to come in but I would like...

How do I replace a needle valve seat on a BS 14? [ 3 Answers ]

I have BS 14 HP with a float type carb. I know the needle is sticking and flooding the engine/ oil/ ground with gas! I have ordered the new needle valve and seat. My question is how do I get the seat out? Does anyone have any information about how to remove one? Help please... Mower parked in...

B&S-13.5 HP engine - loose valve seat [ 1 Answers ]

I have a Briggs & Stratton 13.5 HP L head engine that has suddenly seems to have an overheating problem. It stopped mowing one day when my wife was using it, and I found that the keeper had come off the intake valve. The intake valve stem looked a little dinged up, so I got a new valve stem and...


View more questions Search