Ask Experts Questions for FREE Help !
Ask
    yopp's Avatar
    yopp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 31, 2009, 03:20 PM
    Convert toilet flange for sink
    I have an old toilet with a cast iron flange in my basement that I was hoping to replace with a sink. Is it possible to up hook up a sink to this connection? Would this be up to code as well?
    Thanks
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Nov 1, 2009, 04:43 AM
    Is it possible to up hook up a sink to this connection? Would this be up to code as well?
    Since the opening sets out 12 inches from the wall and the fitting to pick up the sink must come off a vertical stack and be vented it's impossible to convert your toilet to a sink. Sorry! Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert drain for single sink to a double sink [ 1 Answers ]

What is the best way to convert my bathroom sink drain to a double sink setup

Toilet flange bolts make toilet sit at wrong angle [ 2 Answers ]

Previous owners put a bathroom in the rec room. When they installed the toilet flange (to the sewer) it was not aligned with the wall. The toilet sits at a crooked angle, not aligned to the wall. After removing the toilet - the flange that holds the toilet bolt-downs needs to be rotated so...

Looking for good Advise on replacing toilet flange on concrete slab to install toilet [ 26 Answers ]

To whom it may concern: I got a problem with a toilet that has been rocking and twisting for quite some time until it started leaking and what now I pull up the toilet to find out that the flange is broken on one side. I tried that flange plate from home depo but it won't work because the slab is...

Am trying to convert my single sink bathroom to a double sink, [ 1 Answers ]

I have a single sink in my bathroom at this point, am trying to put a double sink counter top on it. My question is if I have to put a double drain pipes or if I can put a T on the excisting one, same question for the hot, and cold water. Am just worried about the drain pipe hopefully you guys can...

Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange [ 1 Answers ]

We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange

View more questions Search