Ask Experts Questions for FREE Help !
Ask
    takeiteezeee's Avatar
    takeiteezeee Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 31, 2009, 02:10 PM
    Kenmore washer agitates but won't spin, motor hums, lid switch OK.
    I have an older Kenmore washer, 70 series. It fills and agitates then quits at the spin cycle, the motor gives a low hum. I by passed the lid switch and it does the same thing. Another question/advice thread mentioned that the drive belt maybe bad, but my model doesn't appear to have a belt at all.. it look likes its some sort of direct drive thing. Any help out there?
    Thanks!
    takeiteezeee's Avatar
    takeiteezeee Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Nov 3, 2009, 09:14 PM

    I also found out that the spin cycle works without water in the tub... and the spin cycle doesn't work with water in the tub.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Frigidaire washer agitates but won't spin [ 8 Answers ]

Model # FWS445RFS2 My washer will wash but will not spin. The tub will not turn by hand at all. I have checked the switch and the belt and they seem fine. Also, before this started I notice the clothes were more damp than usually in the bottom of the tub. I heard a loud clanking like metal...

Ge washer agitates, does not spin [ 5 Answers ]

I have ge washer (wjsr2080t) that agitates fine, but does not spin. I have a feeling it's the water level control as when I remove the air tube from it and restart the spin cycle, it spins like a champ. Just seems odd that this would control spin. But this is a 10 yr old GE that has had so...

Kenmore top loading washer will not spin just hums [ 2 Answers ]

I have a Kenmore #23832100 washer. I washed a load and then on the second load it started making a loud hum when the rinse cycle started. I unplugged it and turned it on its side. I can see the belt is still on and I can turn the rotor. What is my next step? What do I remove if at all and...

View more questions Search