Ask Experts Questions for FREE Help !
Ask
    Mase 3333's Avatar
    Mase 3333 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 31, 2009, 07:43 AM
    Nordyne Gas Furnace
    I have A Nordyne Gas furnace in my home, work up this morning to a cold house. I can't find my manual to troubleshoot the problem. Status light is blinking twice. I can get furnace to work by by-passing the pressure switch w/jumper wire. Could the problem be the Combustion blower assembly. This Assembly was replaced about 4 yrs. Ago.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Oct 31, 2009, 07:54 AM

    Turn the ;ower off to the unit and try it again in a min or so. The fault codes should also be on the back of the door or on the control board itself
    Mase 3333's Avatar
    Mase 3333 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 31, 2009, 08:22 AM
    Quote Originally Posted by Joshdta View Post
    turn the ;ower off to the unit and try it agin in a min or so. the fault codes should also be on the back of the door or on the control board itself
    Thanks for your reply. Can't find fault codes anywhere in unit . Pretty sure it is Comb. Blower assembly... Now just got to find 1 on a weekend... 'bout 80$ worth of plastic..
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Oct 31, 2009, 08:35 AM
    Do you have a exact model number for the furnace?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nordyne heater furnace hot air [ 1 Answers ]

I have a nordyne furnace and the heat will not go on. The blower stays on and blows cold air. Have to shut the emergency switch in order to make it stop. I opened the cover and the red light keeps flashing while the blower is running. Any ideas? Is the fan relay switch bad?

Nordyne Furnace not working [ 27 Answers ]

Nordyne Furnace Model # L1RA 045N-08A. Blower runs constantly, whether the thermostat is on; no flame, no ignition, no heat. Have to unplug furnace to stop the blower. Red status light just steadily blinks on and off, not in a particular cadence. HELP! What do we do? Unit is still under...

Nordyne furnace not igniting [ 3 Answers ]

Can a problem with natural gas pressure cause furnace problems? I have a Nordyne that since the city had a pressure problem does not ignite- no heat! Furnace repair man says that it is the sensor. Can this be caused by low gas pressure? Troube board on the furnace flashes 4 times indicating low...

Nordyne furnace trouble [ 2 Answers ]

I have a Nordyne furnace, and the furnace got stuck in it's cycle. The vent blower would come on and that's it, so I had the circuit board replaced. Now, the a/c works but the furnace cycle won't even start. The light on the board just blinks twice. Any help would be great. Thanks.

Nordyne e2 electric furnace with ac [ 1 Answers ]

Hello I have an nordyne e23h012hn electric furnace, the control board is burnt and evaporator fan will not come on, replaced board and it burnt up to. The circuit on the board that burnt is the common line voltage to the fan, could it be the fan motor shorted causing this problem . Thanks chris ...

View more questions Search