Ask Experts Questions for FREE Help !
Ask
    kgn552004's Avatar
    kgn552004 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2009, 03:49 PM
    Ruud furnace
    We have lived in this house for 3 years without any furnace problems... this year we lit the furnace (and it stays lit), but when we turn the thermostat on, we hear it ignite, but then nothing happens... could it be a thermal coupling? Does anyone have any idea... we thought it was the thermostat and replaced it, but it does the same thing... thanks
    Kgn
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 29, 2009, 04:28 PM
    Ruud has made 2,347 different furnaces over the years could you narrow it down a little like with the use of a model number. My crystal ball is on the fritz again and I cannot see it from here.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ruud furnace problems [ 13 Answers ]

I have a Ruud high efficiency furnace that's giving me fits. The problems started a few weeks ago when I woke up to a cold house. I reset the breaker, it wasn't tripped and the unit seemed to work as it should for a few days, then it happened again. I checked and reseated all the electrical...

Ruud furnace erro 57 [ 2 Answers ]

HVAC Ruud furnace 1st heat use this year flashing error code 57. Have checked drain line and that condensation vent is filled. Any other suggestions before I replace the high pressure switch. Thanks

RUUD furnace won't ignite [ 4 Answers ]

I started my furnace for the first time this year and it doesn't light, it is a RUUD delux 90 plus, model UGEB-10EE-GS, direct vent with electronic ignitor. I turn the furnace on and thermostat up and the exhaust vent kicks on and runs. If I remember from last year the exhaust vent will run for...

No electrical heat-ruud furnace [ 1 Answers ]

I have a 5.5 year old, 4 ton, split, ruudd furnace. Heating is electrical. The heat does not work, the motor runs but it just blows cold air. The cold settings for air conditioning work well. How do I know whether the problem is with the heating elements or something else? Thanks

View more questions Search