Ask Experts Questions for FREE Help !
Ask
    Henry299's Avatar
    Henry299 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 28, 2009, 09:37 PM
    WATER COLUMN based irrigation system unique one
    In case of water column based irrigation system i.e cylindrical storage tank at ground level carrying water about 100 to 200 ft without any pump, how do we establish the relation between the length of pipe (delivery pipe) and size of cylindrical storage tank.
    Thanks.

Check out some similar questions!

How do I maintain 60 psi in my irrigation system [ 1 Answers ]

How do I maintain 60 psi in my irrigation system

Wiring for an Irrigation System [ 4 Answers ]

I have an irrigation system with an underground well, a tank, a pump start relay switch, a timer and a pressure switch set to turn on at 20 psi and off at 50 psi. There are 3 zone valves connected to the timer. There is a separate zone for hose bibs that is not connected to a valve or the timer,...

How to find unique values in an entire column [ 10 Answers ]

hi all please tell me how can I findout the unique values in an entire coloumn. for example I have 3 coloumn in an sheet. Name Prod. Value a 24 100 b 26 240 a 33 120 a 21 200

Drip irrigation system. [ 2 Answers ]

Is a drip irrigation system cost effective? It takes four hour's to water the plants properly with a hose.

Irrigation System Problem [ 2 Answers ]

Five in-ground controllers (zones) handle my sprinkler system sprinklers. These controllers are in 5 different areas on my property. I noticed today that when zone one comes on that zone two comes on at the same time which never was the case in the past. As a consequence, the pressure is...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.