 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hunter ceiling fan remote control
Hello,
I have recently installed a Hunter remote control for my ceiling fan and everything went fine with it. My question is has anyone else experienced the lights turning on by themselves after remote install? I first noticed it while playing PS3... but it also happens while watching t.v. I have left them on for a while to see if they will turn off by themselves but them haven't which leaves me to believe that this does not happen over night. Any Ideas? Sleven77 |
||||
|
||||
|
Change the frequency of the fan and remote. See: Ceiling fan remote controls - help and FAQ- Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello All, First-time home owner attempting to install a Hunter fan w/ Hunter remote. Having an issue with understanding the wiring set-up. Please help!! Ceiling originally had light installed with: (1) White wire (in use) (1) Yellow wire (in use) (1) Yellow wire (not in use)
This is driving me nuts. OK I know where the b and w wires go from the fan to the receiver also the " one " that says light out " which is red. What I have left on the receiver is Fan out and Common out. From the fan there is a brown wire by its self and a bundle with red, yel, gray,...
I was given a replacement remote/reciever at Lowe's. Some kid told me it would work. I ohmed out the motor which has two windings (pink to yellow and red to grey). I paralelled the two windings with the new receiver output and neutral. The fan doesn't run as fast as it did before. The winding ohmed...
How do I reprogram a Hunter ceiling fan remote control #85095-01?
View more questions Search
|
