Ask Experts Questions for FREE Help !
Ask
    goldwaterla's Avatar
    goldwaterla Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 23, 2009, 12:37 PM
    Glow plug
    How to change glow plug on a 7.3 motor?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Oct 23, 2009, 02:13 PM

    Removal and installation. With the engine "stone cold," disconnect batteries, remove valve cover, disconnect glow plug connector, remove glow plug with a 10 mm deep socket, install new glow plug (torque to 13 ft.-lbs.), and reattach connector. After finishing the remaining 3 glow plugs on that bank, clean valve cover, install new gasket, and reinstall valve cover (torque to 97 in.-lbs.). Do the same thing for the other bank of glow plugs and reconnect batteries. Not a difficult job--should take several hours.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I plug my electric oven into a normal plug socket? [ 2 Answers ]

Can I plug my electric single oven into a normal plug socket?

Ford glow plug test [ 1 Answers ]

How do I test ford glow plugs

12-3 wiring from gfi plug to outlet to plug in a 110v pool pump [ 5 Answers ]

Need to verify proper wiring for above 110v pool pump.

Glow plug relay [ 1 Answers ]

Where can I locate the glow plug relay on 1995 E350 7.3l turbo cub:) e van

View more questions Search