Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Remote works the fan but not the light
[ 1 Answers ]
Fan works light will not work( on only.) the wall switch has two switches. I wired one hot lead up .do I need to hook up bouth leads?
Remote works, light works, fan humms does not turn
[ 2 Answers ]
Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...
Remote works for fan, not light
[ 4 Answers ]
I just installed a Hampton Bay Caswyck ceiling fan. The remote works fine on the fan, changes speeds, on and off. The remote will not turn the lights, top or bottom, on. I've checked the wiring, everything is tight. What do I do now?
Hampton Bay Fan w/ Remote: Light Works, Fan Doesn't
[ 4 Answers ]
Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse... View more questions Search
|