Divererter valve

poothathamby Posts: 1, Reputation: 1

New Member

Oct 22, 2009, 02:07 PM

Divererter valve

Hot water not coming in shower. Why?

speedball1 Posts: 29,301, Reputation: 1939

Eternal Plumber

Oct 23, 2009, 06:02 AM

What's the brand name of the shower valve? One handle valve? Does the lavatory have got water? Back to you, Tom

Add your answer here.

Check out some similar questions!

Taking off a push connet valve (toilet valve) [ 9 Answers ]

We need to take off our 20 yr plus push connect valve (grey plastic toilet valve) and put a new metal one in to repair the leak in our toilet connecter ( grey tubing also) Chances are the wall stem is made of grey tubing or copper. We bought a new metal push connect valve and toilet connecter. ...

No Shut Off Valve between water heater and bathroom sink valve [ 14 Answers ]

I have a constant drip in my bathroom sink. After a little trouble shooting, I came to the conclusion that my hot water valve underneath the sink is the culprit. I traced the pipe down the wall, into the basement and to the water heater. The only thing between the water heater and the old valve in...

Stuck middle valve - 3 handle shower valve [ 3 Answers ]

Help and suggestions!! The middle handle, used to divert water from the tub spout to shower head is stuck in the 'tub' position. I have removed the handle and trim bezel and tried to turn the shaft with pliers - no luck & quit before marring the splines on the brass shaft. What now??

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...