Ask Experts Questions for FREE Help !
Ask
    dave cohen's Avatar
    dave cohen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2009, 07:56 PM
    Bryant 383KAV Gas Furnace Does Not Work
    Hi,

    My Bryant 383KAV gas furnace does not work. The RED light (start) does not come on. There is 24 V current coming out of TRANSFORMER into the board. By the way the board fuse is fine. So I'm not sure if the board is the problem.

    PLease help.

    Thank you,
    Dave
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    Oct 20, 2009, 10:33 PM
    Greetings and WELCOME to the site, Dave!

    I moved your question out of Introductions to this forum topic area so that it will be more likely to be noticed and addressed by those who are best able to answer it. Your question will get noticed much more here.

    Introductions is for people to introduce themselves only, and we try to not ask questions there. We would appreciate it if you would return to Introductions sometime to tell us a little bit about yourself, if you would be willing to do that.

    Thanks!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Furnace model 383KAV won't kick on [ 10 Answers ]

I'm not getting any error led blips from the computer board. I can only see one limit switch which isn't tripped. I replaced the thermostat but that wasn't it. I've checked breakers and even tried tripping them off and then back on. Usually if I remember right this furnace goes through a...

Bryant 383KAV Furnace - Code 14 - Not getting 120 volts to ignitor [ 4 Answers ]

Still scratching my head on this one. Everything appears to be working fine on my furnace, except that the ignitor is not getting juice to glow orange/white, hence the gas is not igniting? I disconnected the ignitor harness from the control board, ran the test sequence again, and determined that I...

383KAV Bryant Furnace - Code 14 Not getting 120 volts to ignitor [ 1 Answers ]

Still scratching my head on this one. Everything appears to be working fine on my furnace, except that the ignitor is not getting juice to glow orange/white, hence the gas is not igniting? I disconnected the ignitor harness from the control board, ran the test sequence again, and determined that I...

Bryant 383KAV furnace won't ignite, fan blows cold air. [ 1 Answers ]

First we replaced the thermostat. Then we replaced the ingiter. Still only blows cold air? Any one know what the problem is? :confused

View more questions Search