Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Insulating an attic floor
[ 4 Answers ]
Hello. I live in Waltham, Massachusetts. We want to add more insulation to our attic floor. We have an attic with loose (unattached) plywood boards on top of the joists. Currently, there is only about 1 inch of insulation between those joists. Using R-rating charts, I have calculated that we should...
Ventilatng and insulating when developing an attic
[ 2 Answers ]
I have a 100 year old house, upstairs attic has electrical service and I can run plumbing to the space as well. Have floor insulated and plywood, and framing done. It's a peak roof, so there is limited headroom along the sides, but I need to know the best way to properly ventilate and then...
Insulating 'Sears' type house Floor/wall/attic
[ 1 Answers ]
I am planning renovations for my house which I am told is a 1948 'Sears' type house 1.5 stories, original wood siding, now with metal siding. Thick plaster walls with no insulation. Attic has insulation up to the top of joist. Floors have no insulation. Floors are cold on feet. Duct work only...
Insulating Cape Cod Style House Attic/Crawl Space
[ 3 Answers ]
The house has a Cape Cod roof without any gables in the bedrooms. There are two bedrooms and a bath on the top floor in the back half of the house. The roof angles (45 degrees) down to the front of the house just above the middle floor. In front of each of the bedrooms, there is a crawl space... View more questions Search
|