Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #1

    Oct 17, 2009, 02:49 AM
    Cutting tool
    Name: cutting.jpg Views: 360 Size: 156.0 KB

    Do you think this tool can cut a 1" piece trim wood off the house
    While on the ladder? Using the half moon cutting wheel?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Oct 17, 2009, 10:03 AM

    You realize that the tool cuts by oscillating. 1" is very ambiguous and so is ladder. Being 15' up is different than 6' and a 1" x 1/8" is different than 1" x 3/4".

    Woodcraft (Fein) and Home Depot (Dremel) have areas where you can play with the tool. There are cordless versions too. Check out FEIN Power Tools Inc. - Electric power tools for professionals. for some videos. I think the Dremel site has videos too. Harbor Freight has the lowest cost version of the tool.

    The answer is likely. I own the Fein version.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Proper tool for cutting aluminum siding? [ 11 Answers ]

I am in the process of putting an exterior window in my attic space. The siding is aluminum and although most all of the cut edges will be covered with J channel flashing a small portion will be exposed. My question is which tool will allow me to make the cleanest, straightest cut. I have tried tin...

My frind stop cutting or other ways then cutting [ 3 Answers ]

My closest friend cutts because she was verbally, physically, and sexually abused. But I don't know how to help and its hurts me that she feels that she needs to cut her self to hind the pain. She tried killing herself 3 times and stopped cutting for 1 month but couldn't take it anymore

The right tool for the job [ 3 Answers ]

I have been recently looking at finish nailers (15-16ga) and brad/staple nailers (18ga) I have no clue which I should get. My primary use will (initially) be crown molding (into drywall and cabinets), shoe molding and possibly some baseboards and picture moldings. Will an 18 ga brad nailer...

Craftsman riding lawnmower cutting off in middle of cutting grass [ 1 Answers ]

Craftsman Riding lawnmower is cutting off in middle of cutting grass and then start it back it will cut for awhile then do again. Does sound like it isn't getting gas. Can some on help.

Monitoring Ad Click Tool and Autoresponder tool [ 1 Answers ]

Hi, I want the details of the AD Click Tools and Autoresponder tools. Regards, Stany

View more questions Search