Ask Experts Questions for FREE Help !
Ask
    digger72x's Avatar
    digger72x Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Oct 16, 2009, 05:58 PM
    Connecting Honeywell RTH7400 thermostat
    I need help again. The church members liked the Programmable thermostat installation in Angels Retreat so well they want one in the Church office now. The old thermostat there has 4 wires, RC, G, W, and Y. It's controlling a heater only, no air conditioning. I'm thinking I need to connect the old RC wire to the R terminal and the old W wire to the W terminal on the Honeywell RTH7400 and leave the other two not connected. Am I correct? If not, can you help? Thanks for any help you can give me!

Check out some similar questions!

Rth7400 honeywell thermostat wiring [ 1 Answers ]

I am trying to replace an old American Standard T8424C with a Honeywell rth7400. I am having the worst luck with the wiring scheme. I have looked at the unit itself to make sure the wires are connected to what I think are the right connections, but I don't know what to do with the white and blue...

Wiring New Honeywell RTH7400 Thermostat? [ 2 Answers ]

Okay I have a mercury thermo that I was trying to replace with a digital Honeywell thermo. I have a Rheem furnace & outside A/C unit. I'm assuming this is a "conventional system"? The wires don't match up according to the installation manual so this is what I have: Original Thermo: ...

Lennox thermostat with Honeywell RTH7400 [ 1 Answers ]

Replaceing Lennox thermostat with Honeywell RTH7400 -------------------------------------------------------------------------------- ------------------------------------IF I CONNECT THE O THEN WHERE WILL THE W1...

Honeywell RTH7400 Thermostat Installation [ 1 Answers ]

I'm attempting to replace my old manual thermostat on a 2 stage heat pump with a Honeywell RTH7400 programmable unit. I'm having trouble matching up the wiring. I have: W2 R B Y G X The Honeywell thermostat has receptacles for the following:

Installing RTH7400 Honeywell Thermostat [ 1 Answers ]

I am replacing my (old) Honeywell T8411R thermostat with a (new)Honeywell RTH7400 programmable thermostat. I need help wiring to the new thermostat. My H/C system is a heat pump system. The old thermostat is wired to the following terminals: W1 - White W2 - Brown G - Green R - Red C - Blue...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.