Ask Experts Questions for FREE Help !
Ask
    jfhsr's Avatar
    jfhsr Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2009, 06:48 AM
    John Deere LT155 Lawn Tractor
    How do I change drive belt on a John Deere LT155 Lawn tractor
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Oct 14, 2009, 06:56 AM

    Hi,
    Are you speaking of the deck drive belt or the motion drive belt? That machine has three serial number breaks, none of which apply to the motion drive belt, but do if the machine is equipped with a 38" deck or Freedom42 deck since there are two of each.
    Peace,
    Clarke
    jfhsr's Avatar
    jfhsr Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 14, 2009, 07:19 AM
    Quote Originally Posted by crigby View Post
    Hi,
    Are you speaking of the deck drive belt or the motion drive belt? That machine has three serial number breaks, none of which apply to the motion drive belt, but do if the machine is equipped with a 38" deck or Freedom42 deck since there are two of each.
    Peace,
    Clarke
    Hi, Thanks for responding. It is the motion drive belt. It has the38" deck. It Looses forward motion going up a hill, but not power. Thanks, Jim
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Oct 14, 2009, 07:30 AM
    Hi,
    Here is a picture, and the manual online for the final serail number break is at:
    John Deere Ag - New Equipment: Technical Publications - Equipment Search
    Easier with deck removed. Lock brake, remove nut and guide on flat idler, loosen idler near engine, install at rear first, then front, then at idlers, tighten idler at engine, unlock brake and check routing, put nut and guide back on and reinstall deck.
    Peace,
    Clarke
    Attached Images
     
    Tbarfield's Avatar
    Tbarfield Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jul 1, 2010, 04:48 PM

    What if this don't increase speed what is next?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #6

    Jul 16, 2010, 03:27 PM

    Hi,
    Unfortunately it is a transaxle.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John deere 160 lawn tractor [ 2 Answers ]

I have a john deere 160 lawn tractor that won't start. Was running great. Next time zi went to use it, it wouldn't start. Pulled the plug it didn't look bad but I replaced it anyway. Still no start. Checked and no spark. Bought a new coil still nothing. Gap is good on the plug and the coil. Nothing...

John Deere 160 Lawn Tractor [ 1 Answers ]

How do you adjust the clutch? The mower keeps on going when you mash the clutch in. There doesn't seem to be an adjustment.

John deere lt 190 lawn tractor [ 1 Answers ]

Do you know how to adjust the reverse pedal on a john derre lt 190 lawn tractor? The pedal does not go down far enough and therefore goes very slow in reverse. Thanks

John Deere 160 lawn tractor [ 2 Answers ]

I had to replace the belts in my tractor, and hence had to remove the clutch etc. to do so. Now that I have it back together, the clutch does not disengage the belts and stop the tractor correctly. I assume this is either an adjustment on the clutch, or the belt itself. Can anyone help with this??...

View more questions Search