Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Track Lighting: 6 pendant lights/4 sections of track 2 lights not working?
[ 4 Answers ]
Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...
Track Lights Flicker
[ 2 Answers ]
Hi. This is my first time using this venue. I have a four track lighting set up over my bar. Recently it has begun to dim and flicker. The switch is a low voltage 300W on off switch with dimmer slide. I assume the problem was a bad switch so I went to my local Lowe's Center and purchased a 300...
Hampton Bay Gazebo fans w/lights
[ 2 Answers ]
My husband has already installed two Gazebo 52" fans with lights on our porch ceiling. He installed them in the standard position, a little down from the ceiling. They are too low, threatening our taller family members' safety. How would he go about reinstalling them in the close-to-ceiling...
2 Pole track lights
[ 8 Answers ]
I am putting up my Hampton Bay track lights and have 2 light switches in the room that operate that light. I have tried various combinations of the wires at the light (there are 3 black wires and 2 white (the third white is cut and not used)) and none allow the track lights to work with the...
Multiple lights and ceiling fans
[ 3 Answers ]
My church just bought an old building to move to. In the large room we removed all the lights. We wanted to install 6 light fixtures and 4 ceiling fans with lights. We wanted to add a dimmer switch to dim all the lights but found out all of the wiring is controlled by one switch. If we install a... View more questions Search
|