 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermo coupler questions for Bryant furnace.
I am having problems with my Bryant natural gas forced air furnace. It is electric ignition but does not stay lit. I have turned the temp up to 90 and flipped off the power switch at the unit. When turning it back on it lights for 1 minute and then turns off. I thought the flame sensor might be bad so I changed it. Still it will not stay on. I don't know if it's the thermo coupler or if this model has a thermo coupler. The model number is 383KAV036111I am confident I can change this piece if I can find where it is. Thanks in advance for any help you can give me.
|
||||
Check out some similar questions!
How many CFM's are my furnace pushing. It's a 383KAV, 1/3 h.p. blower. Cooling is on the high tap and the heating is on the low tap. Thanks.
Hi Experts, Can you guys please give me hand? Here's my problem, I have Bryant Furnace Plus 80, it's about 8yrs old. It worked so great until last week, the digital thermostat went dead, it didn't show any numbers on the screen, I thought maybe it's dead, so I went to the store and bought a new...
Hello, My furnace (RUUD) Starts up properly sequentially. The power vent lights, the forced air begins, the glow plug lights , then the gas is delivered. The flames ignite. Perfect! Then the glow plug shuts down and the flame goes out. The timing of these evens seems to be incorrect. The...
I have a bryant gas hot air furnace model #397HAW036100. It has been nothing but trouble since day 1. here's my problem this year again. Purge fan kicks on gas valve goes on to pilot lights. Clicks on gas valve and pilot goes out. Does this about 6 times before it locks out. Last couple years...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
