Ask Experts Questions for FREE Help !
Ask
    der alte adler's Avatar
    der alte adler Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 11, 2009, 06:43 PM
    1985 mercedes 300d turbo
    Hi,
    Tried this question a while ago however tined out, so here goes again.

    This a four part question answer in inches or millimeters is OK.
    1. What is the piston protrusion above the block?
    2. What is the piston sleeve protrusion above the block?
    3. What is the pre-chamber protrusion from the underside of the cylinder head into
    The combustion chamber?
    4. What is the torque on the pre- chamber circular nut.

    Thanks,
    Der Alte Adler.

Check out some similar questions!

Need info about 1978 Mercedes 300D! [ 1 Answers ]

I want to buy one off craigslist but I know nothing about the car. My mother told me that it's a bad idea because parts would be expensive. Is this really true? And (besides millage) what should I ask about? It can also run on veggie oil...

1985 Nissan 300ZX Turbo Running Rough [ 3 Answers ]

OK, I've had this car for 5 years and it always ran great. Did regular oil change and tune-ups. The car began running rough a few months ago and has also been difficult to start, so I got it a tune-up and a new battery but the problems still exist. First, it's hard to start when cold. I've got...

1985 300ZX Turbo Keep or Sell? [ 1 Answers ]

I've had this car for 5 years now at about 85K. Runs very strong, I know what it needs and what it doesn't Need. I realize I won't get back what I put into the car, but I guess you could say I'm looking for something a little more mature. Don't have the money to buy a new car, and I don't want...

1985 300ZX Turbo-Reeks of Fuel [ 3 Answers ]

Recently, these past couple of weeks, my 300ZX reeks of fuel inside the cabin. Sometimes the fuel smells burned, and other times it smells fresh like it's not being burned. The smell is asphyxiating and I have to open the windows to get fresh air. My entire exhaust system was replaced from...

1985 300ZX Turbo Running Rough at Idle [ 3 Answers ]

I've had my 300ZX for almost 5 years and it has never given me any trouble. I change the oil every 2500 miles, use the proper(NGK) plugs, clean the filtercharger, and had the fuel injection service performed. Turbocharger was rebuilt around 65k and exhaust system was redone around the same time....


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.