Lighting a wall gas heater

luckydaze Posts: 1, Reputation: 1

New Member

Oct 9, 2009, 08:35 PM

Lighting a wall gas heater

How do I light a gas wall heater

hvacservicetech_07 Posts: 1,083, Reputation: 75

Ultra Member

Oct 9, 2009, 08:41 PM

Are you able to see the gas valve and pilot assembly?

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Oct 10, 2009, 10:54 AM

Would help to know the brand and model number,, there were thousands of wall gas heaters made

Add your answer here.

Check out some similar questions!

Trouble lighting water heater [ 6 Answers ]

I just moved into a house and when they turned on the gas they mentioned that the pilot light wouldn't stay lit. I suspected the thermocouple as I've had that problem before so I signed off and the next day I went down to Ace and bought a thermocouple. I installed it and it still wouldn't stay lit....

Sears Vent Wall Furnace Lighting Pilot Light [ 1 Answers ]

I have a Sears Direct Vent Wall Furnace and I don't know how to light the pilot light. The instructions aren't clear, and I don't want to blow up the house. The Model # is 867.736230

Wall heater pilot light lit, but cuts off when I turn heater on [ 6 Answers ]

I have a wall heater, the pilot light was out so I re-lit it a couple days ago and it went on.. about 4 hours later I noticed it was out again... same thing off and on for three days... this time I lit the pilot and turned the heater on it immeditly made a click sond and went out completely... it...

Lighting gas water heater and furnace [ 2 Answers ]

Last summer we shut off the furnace pilot light by turning the valve to off. When we tried to relight the older carrier furnace we could not. Someone turned the valve of to the water heater. Now we can not light either.

Gas heater not lighting up [ 3 Answers ]

I have a comfortmaker RPJ II and the blower will turn on when I turn the thermostat on, but the gas is not igniting. Could it be the electronic ignitor or something else that I need to check?