Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Keeprite Furnace Problems
[ 2 Answers ]
I have an error 3 flashing dots which means"pressure switch open when should be closed" The unit is 13 months old. I can't get a tech out for 2 days everyone in my area is busy. Any help would be apprecaited.
Keeprite products
[ 1 Answers ]
Does anyone have any thoughts on Keeprite furnaces and/or air conditioners.
Keeprite ps90-dv pilot comes on burner doesn't fire
[ 3 Answers ]
When I turn the furnace on the pilot flame comes on and the burner does not fire. The pilot will cycle on and off a few times and then quit. This is an itermittent problem That is becoming more frequent. The unit is only 3 years old. Thanks for any help.
KeepRite Furnace Reliability
[ 7 Answers ]
I'm in the market to replace my furnace with a high efficiency model, the contractor I'm talking with has recommended either a Goodman GMH95 or a KeepRite VS90, both are two stage. Does anyone have any comment on either, especially the KeepRite.
Gas furnace (KeepRite C8PN100F14B)
[ 1 Answers ]
I have a brand new gas furnace (KeepRite C8PN100F14B). It works well for a few days after it is installed. But after a few days the induced draft blower start immediately after heating run a heat cycle (even the thermostat now is satisfied). Then the induced draft blower keeps on and off very... View more questions Search
|