Ask Experts Questions for FREE Help !
Ask
    wedge1's Avatar
    wedge1 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Oct 1, 2009, 10:28 AM
    Mower w/n shft into gear.
    My Murray riding mower will not move fwd or bkwd-gears do not engage.
    I found the answer. I took off rear wheel and did not replace sqr key when
    I replaced it. Lucky, I found in on ground.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Oct 1, 2009, 02:52 PM

    Hi,
    Good lesson learned; something must lock the wheel to the axle.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Huskee riding mower won't go into gear [ 3 Answers ]

I've had a Huskee LT4200 riding mower for several years with no problems; runs like a top until... Yesterday I idled the mower to empty the grass catcher but then couldn't get the mower to move. When I engage the transmission catch (in lower back) in order to push it to the garage to look at it,...

MTD lawn mower will not go into gear [ 1 Answers ]

I have a MTD 12.5 hp 38 inch cut riding mower that was giving to me.I put a battery in it and it runs fine, but when I put it in forward or reverse, it doesn't move.Can someone help me out.Thanks Mike

View more questions Search