 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pilot Light on Trane SX 60
How do I light the pilot light on the Trane SX 60?
My gas company will NOT help me and I don't know where the user manual is. I do NOT want to pay the over $50 to have some guy come out here to light this, when I could do this for free if I only knew how. Thank you in advance. |
||||
Check out some similar questions!
I recently purchased my house and when I went to turn on the furnace it did go on, now that its getting cold I went to turn it on again... it didn't go on. There's a switch which I thought was the light switch for the closet in which the furnace is in and I kept switching it on and off... im a...
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
Hey all. I recently joined this site because I was trying to find info on my heater (Trane XE 60). I wanted to know what the pilot light should look like when it is working correctly. Mine is lit but appears to be blowing flame in two directions. This wouldn't be a problem except one direction gets...
This is a Trane XE 60 unit, model TUP080B936A with a standing pilot. Our heat did no go on this morning. I turned the circuit breaker off. 1. How do I remove the front panel? 2. Will the location of the pilot light be obvious? 3. Should the pilot light still be on or would it have been...
I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
