Ask Experts Questions for FREE Help !
Ask
    usndudeman's Avatar
    usndudeman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 30, 2009, 10:24 AM
    Snapper Steel Deck 21500
    Hit a semi-buried stump in the new yard, now it sounds like the blade is hitting the housing. If I bent something it it fixable?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Sep 30, 2009, 11:40 AM

    Hi,
    A bent blade is fairly easily replaceable; a bent crankshaft is replaceable, but a bit more difficult.
    To check crank, remove plug and tilt with plug (hole) or air filter up, depress safety bail and pull engine over. A wobble will be fairly obvious to an observer.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leveling a Snapper 30" mower deck [ 1 Answers ]

How to level a Snapper 30" mower deck?

Changing belt on wizard 14 hp 42 in cut craftsman deck replacing linkage on deck [ 1 Answers ]

How do I replace linkage rods on mower deck on a wizard 14 hp 42 in. craftman deck.

Carbon steel, mild steel and stainless steel [ 2 Answers ]

What is the difference between carbon steel, mild steel and stainless steel ?

Adjust Mower Deck of Snapper Rear Engine Rider [ 1 Answers ]

I need to raise the mower deck of my Snapper rear engine rider. It has a single blade with 30-inch cutting width. Currently, when lever is in upper-most position (#6) the blade still scalps portions of my lawn. I have looked through some online manuals but they are a bit confusing. Help...

Deck top. We have a covered deck, planning on expanding deck, a 2x4 crossed cover [ 1 Answers ]

help!! We are planning on expanding our original deck with an open 2x4 crossed cover... do you have pictures or construction help?? Thanks

View more questions Search