Check out some similar questions!

edcclrt · Sep 29, 2009, 02:43 PM

I need to change the drive belt on an LX176 John Deere garden tractor. What is the best way to get the tension pulley off to remove the old belt? The drive belt not the belt for the mower deck.

edcclrt · Sep 29, 2009, 03:15 PM

Originally Posted by edcclrt

I need to change the drive belt on an LX176 John Deere garden tractor. What is the best way to get the idler pulley off to remove the old belt? The drive belt not the belt for the mower deck. The idler pulley has a spring attached and need suggestion on how to get this pulley off. I can't get the nut off the idler pulley.Thank you

...

Clough · Sep 30, 2009, 12:46 AM

Hi, edcclrt!

Please be patient! It might take awhile for just the right person to come along to address your question. All the Experts and Members here give freely of their time to answer questions.

Thanks!

crigby · Sep 30, 2009, 07:56 AM

Hi,
Lock park brake! That removes the tension. Then it is a matter of loosening and/or removing some idlers and guides. Do the installation at both ends (I do transaxle first) and then do the middle (idlers.)
Picture is listed as "LX1xx" and is the second picture (with the "S" in it.)
John Deere motion drive by crigby
Peace,
Clarke