 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Elite gas dryer-
I've read everoyone's comments and have a similar issue. I've replaced the door switch which had a broken tab. Now when I press the start button, it buzzes (a little bit) and then clicks off. There's a slight smell of enamel as it might be the motor. How can I tell before getting a motor?
Someone mentioned a relay issue but I don't know if that's aprt of theprinted circiut board or in the bottom of the dryer. |
||||
Check out some similar questions!
I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...
Hello. I've read a lot online about others having similar problems with the Kenmore Elite Gas Dryers. I bought this dryer in 2000. Problem 1: Dryer plugged in, touch pad will not activate when pressed. Problem 2: Touch pad will activate when pressed, timer will start when options are...
Hey I have a Kenmore Elite Gas Dryer about 4 years old with a dial timer , it shuts down about every 4 minutes and sometimes stays a running through the full cycle. After it shuts down I can restart the dryer with no problem , the motor sounds good... Thanks for any help Joey
From time to time, I am able to select my drying selections, load size and all the settings but when I push START it only "clicks" and will not start. Then the next day, it is like it "resets" itself and works fine. There seems to be no reason when or why this occurs. Is there any reason why...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
