Ask Experts Questions for FREE Help !
Ask
    cmaries's Avatar
    cmaries Posts: 3, Reputation: 1
    New Member
     
    #1

    Sep 27, 2009, 04:43 PM
    Honeywell rth230B thermostat installation
    I have an air handler in the ceiling of the garage and a condenser outside. I live in Fl and 95 in the house all the time is too hot.

    I am trying to install the Honeywell RTH230B thermostat. The old thermostat had the following wires

    Red: rc
    White: w
    Green: g
    Yellow: y
    Blue: c

    I have put
    Red: rh
    White w
    Yellow y
    Green g
    Blue nowhere

    I put batteries in. NOthing . The habdler is not running. The a.c is not running.

    I do not know what I did wrong.. Should I go buy an easier one? I am a single mother trying to self sufficient.

    Help
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #2

    Sep 27, 2009, 06:05 PM
    Add a jumper wire from RC to RH(at the thermostat). It should get you up and going.
    cmaries's Avatar
    cmaries Posts: 3, Reputation: 1
    New Member
     
    #3

    Sep 27, 2009, 06:44 PM

    Unfortunately it has a jumper and still does not work. All the circuit breakers are on. The handler and the air condenser.
    I have tried twice.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #4

    Sep 27, 2009, 06:52 PM
    Did you turn the power off going to the air handler first.(if not you may have blown a transformer or low voltage fuse) With the thermostat apart if you jump R to G or R to Y will any thing run? If not it's a voltage problem.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell RTH230B Digital Thermostat Installation [ 3 Answers ]

I bought a Honewell RTH230B to replace and mercury base Honewell T822B thermostat. The old thermostat had the following wires: Blue Red Yellow White Green I wired the new RTH230B as follows:

Honeywell RTH230B programmable installation [ 4 Answers ]

My old Honeywell thermostat wiring is, White to W, yellow to Y, green to G and red to R, there also is a small piece of red wire jumping from Y to 1, (idon't know if that jump wire is for the fan only). The new RTH230B instructions show a small line under the Rh and Rc connections is that a...

Honeywell rth230b installation [ 1 Answers ]

I'm replacing a Honeywell LR69071 with a RTH230B. The LR69071 is currently wired the following. W2 white R red G green Y yellow B blue X black


View more questions Search