 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Paint on drywall seam --10 in .that surromds ouside od shower stall has cracked. Pulling it off I discovered the mesh drywall tape below showed no signs of mud and was on top of dryall which now has developed a 6 in length of mold--- Painter 3-years ago did not do proper job-what to do?
I am finally finished with a 10 foot addition to the 2 bedrooms at the front of my home. Once the additional was final on the exterior, ie: masonry walls, roof framing, sheathing, etc. I was left with the final task of removing the original exterior mas. Wall down to the floorline. Once this was...
So I paid someone to finish my drywall. He "completed" the job while I was at work, so I didn't get a chance to look at it. When I got home I noticed that he had only sanded with 100 grit paper, and there are sanding lines everywhere! Is this standard practice? I have always used 220 grit, and...
Is the strength of drywall affected by humidity?
I am attempting to put in a new bathtub after gutting our old bathroom. I am not sure if the drywall surrounding the tub should go down to the floor or stop at the tub?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
