Ask Experts Questions for FREE Help !
Ask
    Buck Nated's Avatar
    Buck Nated Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 23, 2009, 08:07 AM
    Pouring hot liquids down the drain
    We have a small debate in my house. I don't like anyone pouring hot liquids down the drain ( coffee, straining pasta etc.) without at least running cold water from the tap. Ideally we should wait till liquids cool but I know that's not always possible. Can hot liquids harm the pvc drain pipes?
    stevetcg's Avatar
    stevetcg Posts: 3,693, Reputation: 353
    Ultra Member
    		  
    #2

    Sep 23, 2009, 08:50 AM

    Nothing you are able to heat up will affect the PVC unless you are dumping hot turpentine or glue down there. Boiling water is only 212 degrees... not really that hot. Coffee is much less hot.

    Edited to add: PVC has a melting point of 387 deg... nothing you can boil will come close to that.

    Furthermore, drains flush quickly, so it would be the functional equivalent of passing your hand quickly through a candle flame.

    Or in other words... dump water... its fine.

    PVC is not recommended for any constant feed hot water (input lines) but the drains do not store hot water under pressure so there is no fear of heat related rupture.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Sep 23, 2009, 10:17 AM
    Although Steve doesn't claim to be a plumber he sure sounds like one.
    He's bang on with his response. Your fears about pouring hot liquids down the kitchen sink are groundless. He explained it much better then I could.
    Nice catch Steve! Tom
    KingsX's Avatar
    KingsX Posts: 231, Reputation: 10
    Full Member
    		  
    #4

    Sep 23, 2009, 10:49 AM

    Excuse my novice-ness, but aren't most drains ABS plastic? Or is ABS a type of PVC?
    stevetcg's Avatar
    stevetcg Posts: 3,693, Reputation: 353
    Ultra Member
    		  
    #5

    Sep 23, 2009, 11:03 AM
    Quote Originally Posted by KingsX View Post
    Excuse my novice-ness, but aren't most drains ABS plastic? Or is ABS a type of PVC?
    Depends on where you live and when your home was built. The answer remains the same though... passing your hand through a candle flame...
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #6

    Sep 23, 2009, 11:14 AM
    Quote Originally Posted by KingsX View Post
    Excuse my novice-ness, but aren't most drains ABS plastic? Or is ABS a type of PVC?
    PVC and ABS are both plastic. They both will accept hot liquids.
    There are four types of plastic in general use. Black plastic, which is ABS,(Acylonitrile Butadine Styrene) and white plastic which is PVC and CPVC,(Polyvinyl Chloride and Chlornated Polyvinyl Chloride) ABS is used for drainage. PVC is used outside the house for cold water feed from the pump or the meter Also drainage both inside and outside the house. CPVC is rated for both hot and cold lines and can be used to plumb a house on the inside and then we have Polybutylene pipe,(PB or Polly Pipe) which is flexible tubing on water piping.
    And now you know more then you ever wanted to! Cheers, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Finding speed of air (U tube with different liquids) [ 5 Answers ]

The diagram of the problem is: http://www.webassign.net/sf/p9_80.gif As (a) shows, there is a U tube open at both ends. There is water in the tube. Air in both ends are at equal pressure Pa (atmospheric pressure). The water levels are equal. Figure (b) shows that oil is added in the right tube...

Shower drain water pouring out drain for washer [ 1 Answers ]

When my shower is running it pours out my washing machine drain. What could be ?

Attenuation of light through coloured liquids. [ 4 Answers ]

I am trying to research the attenuation of light through colored liquids, in particular Ribena. I used a colorimeter with varying Ribena concentrations and a steady pH value to gain some absorbency values. I am struggling to find a relationship between absorbency and attenuation. I would like to...

Viscous Liquids [ 3 Answers ]

Can the density of a liquid affect its viscosity?

View more questions Search