 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
New programmable thermostat installation
Hi to all,
Hope anyone can lean me a hand on my installation for a new programmable thermostat.. I got old 3att86 model thermostat which I'm about to replace with lux touchscreen tx9000ts. The wire with old 1 are labelled ( Y, G , R, O, W2, E and C) while my new has (W,Y,G,B,O,RC,RH and C). Im just confused wirth wires R, w2 (where it be connected) and specially E of which it is not present in my new thermostat... ty in advance |
||||
Check out some similar questions!
I am in the process of changing over to a Programmable Thermostat and wanted to have some guidance on the wiring on the new thermostat. Old themostat: White-Rogers Heat Pump Thermostat 2H/1C, Type 1F59-11 Current wiring at this thermostat: Horizontal wires: W- white wire R- red wire L- no...
Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!
I have bought a house with a Hunter Programmable thermostat model #47250 (not #47250A) and need help to program it. Anyone have the instructions?
I just bought and installed a NOMA 7 day programmable thermostat, part number 52-2549-0. It runs both the heating and air conditioning. Everything is OK but the ac stop every 3 minutes for a couple of minutes then it resumes again ! I set the temp 5 degrees C less, but the problem is the same....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
